Water filtration installation tips

A whole home system’s installation point is determined by your home’s existing pipework layout to ensure every tap, shower, and appliance receives filtered water, the system must be spliced into the main line before the first tee-off (the point where the pipe branches to different parts of the house). Placement depends on site access, pipework layout, and compliance requirements. Common installation locations include: • Garage walls • Near the water meter • External garden areas • Utility spaces Placement depends on site access, pipework layout and compliance requirements.

Reverse osmosis systems are typically installed under a kitchen sink with a dedicated tap or 3-way mixer. Space is required for filter cartridges, the storage tank and future servicing access. Slower water flow at the RO tap is normal and reflects the ultra-fine filtration process, not a fault.

Mandatory post-pump installation: The filtration and UV disinfection unit must be installed on the discharge side of the pump. This ensures a consistent, pressurized flow through the UV chamber, which is required to prevent air pockets and overheating. Sequential pre-filtration: Rainwater systems require clear, unobstructed flow into the pre-filters (typically sediment and carbon) to remove particles that could otherwise "shield" bacteria from the UV light. UV disinfection: To provide effective bacterial protection year-round, the UV lamp requires a stable, continuous power supply. Maintenance access: The system must be positioned to allow safe, easy access for annual lamp monitoring and replacement.